M-300 Heavy duty cleaner
A universal fast cutting mixture of fine abrasive particles for outstanding buffing and polishing action. Formulated for professional, high temperature machine buffing, but can also be applied by hand. Especially formulated for the preparation and maintenance of polyester and epoxy moulds or surfaces. Developed es the second step after using OSKAR'S M-200 LIQUID EXTRA HEAVY DUTY CLEANER to bring the final high gloss surface. Then to be followed with the application of the OSKAR'S M-700 MOULD RELEASE PASTE WAX
The unique feature of the polishing alumina used for the OSKAR'S M-200 and M-300, is that the abrasive particles „break-down" to finer and finer particle size, during the application, and thereby ensure both effective and gentle cleanng and polishing action simultaneously, without any possible damage to the gel-coat.
Before applying M-300, make sure that the mould or surface is completely free from any foreign matter, such es cured glasfibre particles etc. that might damage the surface if allowed into the buffing pad er application cloth. Always use only clean buffing pads.
Does not contain silicones or waxes.
IMPORTANT: Shake the container well before each application!
1. Apply M-300 generously with a soft cloth of directly on the buffing pad and smear out the product evenly to an area of approximately 50 - 50 cm (2 - 3 sqft). Machine buff until sanding marks er scratches are removed. Repeat application if needed until the surface is perfect. The best buffing effect is achieved by using OSKAR 'S BUFFING PADS No. 880A (round up) twisted wool. Recommended RPM: 1800 to 2100 RPM maximum.
2. When the compound begins to dry, ease pressure to achieve a high gloss.
IMPORTANT: CLEAN THE PAD FREQUENCY FROM RESIDUE.
Store in a cool and dry place, protect from frost, 24 months
Refer to the Material Data Sheet.